Sub zero ICBCL3650F

Features

Dimensions: 2134x914x610 mm (HxWxD)

Single door freezer with ice maker Classic line ICBCL3650F/S/T with the following features: 

Tubular handle (T) or professional handle (P)

Gross volume: 637 l

Gross weight: 206 kg

Energy efficiency class: E

Noise level: 35 dBa

Average annual consumption: 341 kWh

Electronic microprocessor ensures constant temperature control and regulates defrosting phases by activating them only when necessary (intelligent No frost). 

Split Climate™ intelligent cooling system: uses an evaporator and two independent fans to guarantee a more uniform internal temperature and to regulate the temperature of the drawers by +/- 1°C in relation to the upper compartment. 

ClearSight™ lighting system: LED lights located in the top panel, under each shelf and in each fruit and vegetable drawer fully illuminate the cavity reducing shadows when the compartments are fully filled. 

Night function: optimises lighting based on ambient light, detected by an internal sensor, reducing brightness by 90% in poorly lit rooms. 

All shelves, drawers and balconies are fitted with stainless steel profiles. 

Ergonomic touch controls located in an easily accessible position above the drawers. 

Ventilation grille with pneumatic opening for easy access and periodic cleaning of the condenser. 

Transparent lexan adjustable counter doors. 

Water filter: improves the taste of water and ice by removing chlorine, odours, lead, mercury, benzene, asbestos. 

Max Ice: this function increases ice production by 40% over a 24-hour period. 

Ice container with a capacity of 3.6 kg. 

Sabbatical day function (Star K certified). 

All Sub-Zero refrigerators are made in the USA and feature ABS-painted aluminium interiors and lexan balconies. Every single unit is fully commissioned and tested before leaving the factory. 

Installation Types

Two types of installation can be chosen for this product line:

Flush: the product is inserted into a recess and the doors and grille remain protruding.

Flush: the product is inserted into a recess and the doors and grille remain flush with the recess. In this type of installation, a 13 mm gap is left between the edge of the door and the column to allow the door to open properly.

Please note: the side profile kit must be used for flush installation.