Wok induction hob
Vario 400 Series
VI 414
-- 32 cm cooking zone with
booster function.
-- Ideal for using the Wok pan and
its ring.
-- Frying Sensor for precise temperature control
precise temperature control during frying.
frying.
-- Easy control of all functions
thanks to two-colour display indicators.
display.
-- Solid stainless steel control knob.
stainless steel control knob.
-- Precise machining of steel with
3 mm thick.
-- Possible countertop installation
or flush-mounted.
-- Perfect combination with all Vario 400
Perfect combination with all Vario 400 series appliances.
Cooking zones
1 induction zone ø 21 cm (2200 W,
with booster 3700 W), with automatic
automatic extension up to ø 26 cm (2600 W
with 3700 W booster) and to ø 32 cm
(3300 W, with 3700 W booster).
Operation
Steel knobs with ring
and silkscreen printing for cooking zones and
cooking zones and power levels.
Electronic power control with 12
levels.
User-friendly control with 2-colour display
colours (white/orange).
Features
Frying sensor.
Booster function.
Chronometer.
Programmable cooking time.
Options menu.
Power management function:
electronic regulation and limitation
of power consumption according
the need.
Possibility of hood control
(with compatible model).
Home Connect
Integrated digital services (Home
Connect) with the home network
wireless via WiFi.
The operation of Home
Connect mode depends on the availability of the
Home Connect service in each
country. For more information
visit www.home-connect.com.
Security
Operating light
Pan recognition system.
Residual heat indication
Automatic safety shutdown.
Installation precautions
Depending on the type of installation
(surface-mounted or flush-mounted, with or without lid), the
cover), the position of the recess
recess and knob may vary.
vary.
It is advisable to align knobs and
cooking zones.
If the thickness is greater than 23 mm
refer to the technical drawing regarding
on the installation of the knobs,
(provide a recess in the
rear).
If several appliances of the
Vario 400 series without cover
it is necessary to use the
element VA 420 between the various
luminaires. Depending on the type of
of installation, the corresponding
corresponding connecting element.
connection element.
Important: any hobs
(VG, VP and VR), if equipped with a
stainless steel cover, can only be
only be installed in individual built-in compartments.
single units. Therefore, it is not possible to
combine several appliances in
a single hole. If several luminaires are installed
luminaires in individual slots, the
minimum distance between them must be
of 50 mm.
The load-bearing capacity and stability, particularly
in the case of thin worktops, must
be supported by appropriate
substructures. Take into
consideration of the weight of the appliance
and additional loads.
Additional installation instructions
flush:
Installation is possible in floors made of
stone, synthetic or solid wood.
The thermal resistance
thermal resistance and watertightness of the edges
of the notch. Regarding
other materials, please consult the
manufacturer of the worktop.
The groove must be continuous and
uniform, so as to ensure the correct
positioning of the unit
on the gasket. Do not use a
discontinuous coating.
The width of the joint may vary
due to dimensional tolerances of the
combinations and the notch on the surface
working surface.
If several appliances are installed in
individual niches, provide a space of
at least 50 mm between the niches.
Only to be used with pans
ferromagnetic pans.
The appliance is equipped with springs
fixing springs that lock the top after
insertion from above.
Appliance weight 10 kg
Connection values
Total consumption 3.7 kW.
Connection cable length 1.5 m
without plug.
