Full Induction hob
Full Induction hob
Vario 400 Series
C X 482
- The most advanced
- With stainless steel frame.
- Unique cooking surface.
- Total freedom of positioning
of the pan across the entire surface.
- The entire
surface of the hob can be used for
- Max. power for large pots
- TFT touch display for quick and intuitive
of all functions quickly and intuitively.
A single cooking surface of 2750 cm².
48 micro-inductors guarantee
perfect flexibility of the entire hob
Up to 5 cooking positions can be recognised
up to 5 cooking positions simultaneously.
TFT touch control display with
Electronic control with 17 levels.
Cooking Sensor function (cooking sensor
Professional Cooking function.
Dynamic cooking function.
Teppan Yaki function.
Booster for pots.
Booster for pans.
Keep warm function.
Individual position detection.
Timer for each cooking position.
Power management function:
electronic regulation and limitation
of power consumption according
according to need.
Possibility of hood control
(with compatible model).
Integrated digital services (Home
Connect) with the home network
wireless via WiFi.
The operation of Home
Connect Wireless via WiFi depends
on the availability of the Home Connect service
Connect service in each country.
For more information visit
Main switch (on/off).
Residual heat indicator.
Automatic safety shutdown.
Depending on the type of installation (surface
or flush-mounted), please observe the
If several appliances of the
Vario 400 series without cover
it is necessary to use the element
element VA 420 between the various
luminaires. Depending on the type of
of installation, the corresponding
corresponding connecting element.
Important: any hobs
(VG, VP and VR), if equipped with a
stainless steel cover, can only be
only be installed in individual built-in compartments.
single units. Therefore, it is not possible to
combine several appliances in
a single hole. If several luminaires are installed
luminaires in individual slots, the
minimum distance between them must be
of 50 mm.
The load-bearing capacity and stability, particularly
in the case of thin worktops, must
be supported by appropriate
Take into account the weight
of the appliance and additional loads.
Additional instructions for flush-top installation
Installation is possible in countertops made of
stone, synthetic or solid wood.
The thermal resistance and
thermal resistance and watertightness of the edges
of the notch. Regarding other
materials, please consult the
manufacturer of the worktop.
The groove must be continuous and
uniform, so as to ensure the correct
positioning of the unit on the
gasket. Do not use a
The width of the joint may vary due to
due to dimensional tolerances of the
combinations and the notch on the work surface.
If several appliances are installed in
individual niches, provide a space of
at least 50 mm between the niches.
Only to be used with pans
The Wok cooker - WP 400001- cannot
be used on this top.
Depth in the cabinet 63.6 mm.
Installation with intermediate shelf.
The appliance can be installed
Appliance weight 27 kg.
Total consumption 7.4 kW.
Connection cable length 1.5 m