Full Induction hob
Variety Series 400
C X 482
The most advanced technology
induction.
With stainless steel frame.
Single cooking surface.
Total positioning freedom
of the pot on the entire surface.
Can be used the whole
cooking surface for
cook.
Max. power for large pots
dimensions 5.5 kW.
TFT touch display for control
quick and intuitive of all functions.
Cooking areas
A single cooking surface of 2750 cm2.
48 micro-inducers guarantee a
perfect flexibility of the entire plan
cooking.
They can be recognized
simultaneously up to 5 positions
cooking.
Operation
TFT touch control display
directions for use.
Electronic adjustment at 17 levels.
Description
Cooking Sensor function
cooking).
Professional Cooking Function (cooking)
professional).
Dynamic cooking function
dynamics).
Teppan Yaki function.
Booster for pots.
Booster for pans.
Hot maintenance function.
Individual location identification
cooking.
Timer for each cooking position.
Stopwatch.
Count down.
Information key.
Power Management function:
electronic regulation and limitation
of electrical absorption
depending on the need.
Possibility of control hood
(with compatible model).
Home Connect
Integrated digital services (Home)
Connect) with home network
wireless via WiFi.
The operation of the Home mode
Connect Wireless via WiFi depends
from the availability of the Home service
Connect in every nation.
For further information visit
www.home-connect.com.
Security
Main switch (on/off).
Residual heat indicator.
Children's security.
Break function.
Automatic shutdown of safety.
Mounting precautions
Depending on the type of installation (in
support or top thread), respect
dimensions of the carving.
If multiple devices are combined
vario 400 series without cover
the use of the element
of conjunction VA 420 among the various
equipment. Depending on the type
installation must be expected
corresponding element of
conjunction.
Important: any cooking plans
(VG, VP and VR)
stainless steel cover, can
installed only in recessed rooms
singles. Therefore, it is not possible
combine multiple luminaires with
a single hole. If you install more
luminaires in individual carvings
minimum distance between them must be
50 mm.
Flow and stability, in particular
in the case of thin work plans, must
be supported by means of opportunities
substructures.
Consider weight
of the device and additional loads.
Additional instructions for installation
top thread:
Installation is possible in plans
stone, synthetic or solid wood.
Resistance must be respected
thermal and tinned edges
of the carving. With regard to others
materials please consult the
producer of the work plan.
The groove must be continuous and
uniform, so as to ensure the correct
positioning of the device on
gasket. Do not use a
discontinuous coating.
The joint width may vary to
cause of dimensional tolerances of
combinations and carving on the plan of
work.
If multiple devices are installed in
single niches predict a space of
at least 50 mm between the niches.
To be used only with pots
ferromagnetic.
Wok pot - WP 400001- can not
be used on this floor.
Depth in furniture 63.6 mm.
Mounting with intermediate shelf.
The appliance can be installed
from above.
Device weight 27 kg.
Connection values
Total absorption 7.4 kW.
Connection cable length 1.5 m
without plug.
