neff t48cb1ax2

Technical data
Design: Frameless
Speed:
Power stage for pots
Features:
4 induction cooking zones
TouchControl
Digital display of cooking levels
CountUp timer
Short-time alarm
Restart function
Quick Start function
Power and size:
Cooking zones: 1 x Ø 210 mm, 2.2 kW (max. power level 3.7 kW) induction; 1 x Ø 180 mm, 1.8 kW (max. power level 3.1 kW) induction; 1 x Ø 180 mm, 1.8 kW (max. power level 3.1 kW) induction;1 x Ø 210 mm, 2.2 kW (max. power level 3.7 kW) induction
17 power levels
Environment and safety:
2-stage residual heat indicator for each cooking zone
Main switch
Pot detection
Power management function
Automatic safety switch-off
Child safety lock
Wipe protection function
Dimensions:
Unit dimensions: (H/W/D) 223 x 802 x 522 mm
Installation dimensions: (H/W/D) 223 mm x 750 mm x 490 mm
Min. worktop thickness: 16 mm
Length of connecting cable: 110 cm
Connected load: 7.4 kW
Connection cable enclosed in packaging
Integrated downdraft ventilation system
Induction hob with fully integrated, powerful downdraft extraction module.
Choice of exhaust or recirculation operation, special accessories are required in each case:
Z811DU0 for exhaust air operation
Z821PD0 for fully or partially recirculated air operation with cleanAir recirculation filters Z821UD0 for non-recirculated air operation with cleanAir recirculation filters
Automatic switch-on of the ventilation system when a cooking zone is in use
Automatic delayed switch-off after cooking to eliminate residual odours after cooking (in specific ultra-quiet fan stage, 12min (exhaust air), 30min (recirculation air), can be switched off manually)
Completely manual control via TouchControl possible
Fan technology with highly efficient and low-noise EcoSilence Drive motor. Flow-optimised airflow in the interior
Easy removal and cleaning of the grease filter and overflow protection unit:
Convenient one-hand removal of the unit via a floating glass ceramic handle
Large 12-layer stainless steel grease filters for high grease filtration efficiency ( 94 %)
All parts are easy to clean, dishwasher safe and heat resistant
Condensate and overflow protection container, approx. 200 ml capacity
Condensate and overflow protection tank, approx. 200 ml capacity
Safety overflow tank (dishwasher-safe) with additional 700 ml capacity. Easily accessible and removable from below.
Total storage capacity of 900ml (200ml + 700ml).
Waterproof ventilation system
Extractor hood performance:
Exhaust air capacity (according to EN 61591): min. Normal stage 332 m3/h , max. normal stage 500 m3/h , max. boost/intensive stage 575 m3/h
Recirculation capacity (according to EN 61591): min. Normal stage 327 m3/h , max. normal stage 500 m3/h , max. boost/intensive stage 565 m3/h
min. Normal stage 60 dB re 1 pW , max. normal stage 68 dB re 1 pW , max. boost/intensive stage 72 dB re 1 pW
Noise values in recirculation mode: min. Normal level 58 dB re 1 pW, max. normal level 68 dB re 1 pW, max. boost/intensive level 70 dB re 1 pW
Grease filter efficiency: 94 %.
All performance data is preliminary, based on the latest prototype test results and will be updated as soon as final data is available.
Average energy consumption: 61.6kWh/year
Energy efficiency class: B (on a scale of energy efficiency classes from A+++ to D)
Fan efficiency class: B
Average energy consumption: 55 .
Grease filter efficiency class: B
Noise min./max. normal setting: 60 dB & 68 dB
In recirculation mode 2 x 2 directly integrated, high-performance cleanAir recirculation filters
Optimised odour reduction capabilities for cooking applications with complex odour molecule chains (e.g. fish odours)
Large filter surface with high odour reduction rate
Filter life of 360h during intensive cooking (not regenerable)
Very low noise with optimised psychoacoustics
Easy access and removal from the top through the air inlet
cleanAir replacement filter set Z821VR0
For recirculation operation 2 x 2 directly integrated, high-performance cleanAir recirculation filters
Planning and installation instructions
Optionally suitable for exhaust or recirculation operation. Mandatory installation accessories required:
Z811DU0 for exhaust air
A cleanAir recirculation module (special accessory Z821PD0) is required for full or non-guided recirculation operation A cleanAir recirculation module (special accessory Z821UD0) is required for non-guided recirculation operation
Planning information:
Planning is possible as wall and island planning
The product fulfils the requirements of the needle flame test (according to IEC 60335-1), the V2 flammability class (according to UL94) and the B1 building material class for flame-retardant materials (according to DIN 4102-1). The Z821UD0 accessory for unguided recirculation operation fulfils these requirements. Provisions also
The maximum immersion depth is 223mm under glass for top-mounted units and 227mm for units suitable for flush mounting.
The unit must remain freely accessible from below
No intermediate shelf is required under the appliance. The drawers must be removable. The rear panel can be left in place - only a cut-out for the air outlet (position and size can be taken from the installation instructions) is required.
The "Plug 'n Play" Starter Set Z821UD0 (unguided recirculation operation) requires a vertical backflow opening of min. 25mm behind the furniture rear wall - recommendation: 50mm.
The minimum worktop thickness is 16mm for top-mounted and flush-mounted units with the Standard installation system. Installation in thinner worktops is also possible with the spare part: Content area 626792
The total unit weight is 26kg. The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. The appliance weight (including corresponding weights such as filled pots) and the worktop manufacturer's specifications for structural integrity must be observed.
The "Plug 'n Play" Starter Set Z821UD0 (unguided recirculation operation) enables simple and quick installations in worktop depths ≥60cm. For installations with extract configuration (Z811DU0) and in fully or partially ducted recirculation configuration (Z821PD0) - a worktop depth of ≥70cm is required.
For all partially and unguided recirculation plans, an air return opening of ≥400cm² is required in the plinth area. The opening can be realised via outlet grilles, louvred grilles or slightly shortened plinths, depending on the kitchen furniture manufacturer's range.
The air outlet on the rear of the unit can be combined directly with a flat duct element (NW 150).
Pipework up to 8m with three 90° bends is possible
When installing an air duct in exhaust air mode and a chimney-bound fireplace, the power supply line must be provided with a suitable safety cut-out.
In exhaust air mode, a backflow damper with a maximum opening pressure of 65Pa should be installed.